ACOUSTIC PIANO part
- You can use “Assign” to assign the same function of each control (outlined in blue) to a general purpose controller like a pedal or wheel. Ø“Configuring the assignments”
- You can configure the detailed settings for the part from the menu screen. Ø“A.Piano menu”
- By holding down the [MENU] button and operating another button or knob, you can directly switch to the related menu screen for the button that you pressed.Ø“Basic controls”
- TONE
Name
Explanation
[TONE SELECT] knob
The indicators above the knob light up according to the tone category that’s selected.
GRAND: Grand piano
UPRIGHT: Upright piano
When you press the [TONE SELECT] knob:
The TONE LIST screen is shown.
[PIANO DESIGNER] button
The PIANO DESIGNER screen is shown. You can make more detailed changes to the sound here.
This is the same screen as the A.Piano menu.
[BRIGHTNESS] knob
The sound gets darker when the knob is turned counterclockwise, and brighter when the knob is turned clockwise.
[STEREO WIDTH] knob
Turn the knob clockwise to make the sound more spacious.
- Common for all parts
Name | Explanation |
[LEVEL] knob | Adjusts the part volume. |
When turned while you hold down the [SHIFT] button: | |
Adjusts the part pan. | |
[ON/OFF] button | When you press this button to make it light up, the part turns on. |
When you press this while holding down the [SHIFT] button: | |
Configures the MIDI output settings for the parts. | |
SPLIT [LEFT]/[RIGHT] buttons | Splits this part for performance. Ø “Dividing the keyboard into two regions (split)” |
OCTAVE [DOWN] / [UP] buttons | Changes the key range for the part. Ø “Raising/lowering a part’s key range in octaves” |
KEY TOUCH [SELECT] button | Changes the playing feel (touch) of the keyboard. The indicators to the left of the button light up according to the type that’s selected. H: Heavier key touch M: Standard key touch L: Lighter key touch
|