TOTAL EFFECTS

You can use “Assign” to assign the same function of each control outlined in blue to a general-purpose controller like a pedal or wheel. Ø“Configuring the assignments”
You can configure the detailed settings for the part from the menu screen. Ø“Total FX menu”
By holding down the [MENU] button and operating another button or knob, you can directly switch to the related menu screen for the button that you pressed.Ø“Basic controls”

Name	Explanation
[CTRL 1] knob	The effects of the knobs change according to the type you select.
[CTRL 2] knob
[SEND] button	Pressing this button makes the ROUTING screen appear. You can configure how the MFX is applied. Ø “Configuring the routing”
	When you long-press the [SEND] button:
	You can configure the part to which MFX is applied.
[ON/OFF] button	When you press this button to make it light up, the MFX is applied.
	When you press this while holding down the [SHIFT] button:
	Switches between MFX types. The indicators above the button light up according to the type that’s selected. FILTER: filter effect MOD: modulation effect DRIVE: distortion effect LO-FI: lo-fi effect DELAY: delay effects Other: other effects

Name	Explanation
[LEVEL] knob	Turn the knob clockwise to increase the delay volume.
[TIME] knob	Turn the knob clockwise for a longer delay time (the time it takes for the sound to echo).
[FEEDBACK] knob	Turn the knob clockwise to increase the feedback (the ratio of delayed sound that’s fed back to the input).
[SEND] button	When the button is pressed, the Delay Send Levels screen appears. Ø “Using the TOTAL EFFECTS delay and reverb”
[ON/OFF] button	When you press this button to make it light up, the delay effect is applied.
	When you press this while holding down the [SHIFT] button:
	The delay time is synchronized to the tempo.

Name	Explanation
[LEVEL] knob	Turn the knob clockwise to increase the reverb volume.
[TIME] knob	Turn the knob clockwise for a longer reverb time.
[SEND] button	When the button is pressed, the Reverb Send Levels screen appears. Ø “Using the TOTAL EFFECTS delay and reverb” NOTE You can select whether to use the MFX for just one part or for all parts. When using MFX for all parts, you can’t adjust the delay/reverb send amount.
[ON/OFF] button	When you press this button to make it light up, the reverb effect is applied.
	When you press this while holding down the [SHIFT] button:
	Switches between reverb types. The indicators above the button light up according to the type that’s selected. HALL1, HALL2: hall reverb (simulates the reverberations of a hall) ROOM: room reverb (simulates the reverberations of a room) SHIMMER: a reverb with a characteristic sparkling high-end sound PLATE: plate reverb (a reverb unit with a metallic plate that vibrates) OTHER: other reverbs