Restoring the factory default settings (Factory Reset)

Here’s how to return the J-6 to its factory-set state.

  1. While holding down the [HOLD] button, turn on the power.

    The [CHORD] button blinks.
    To cancel the factory reset, turn off the power.


  2. Press the [CHORD] button.

    The factory reset is executed.


  3. When all buttons are blinking, turn the power of the J-6 off and then on again.


Backing up and restoring your data
Backup
  1. Connect your computer to the J-6 with a USB cable.

  2. While holding down the [ø (play)] button, turn the power on.

    The drive on this unit takes about a minute to get ready. The keyboard buttons light up to show the progress.


  3. Open the “J-6” drive on your computer.

    The backup files are located in the “BACKUP” folder on the “J-6” drive.


  4. Copy the backup files to the computer.

    Copy all of the files in the “BACKUP” folder.


  5. Once copying is finished, eject the USB drive from your computer.

    Windows 10/8/7

    Right-click on the “J-6” icon and click “Eject”.

    MacOS

    Drag the “J-6” icon to the Trash icon in the Dock.


  6. Turn off the J-6.


Restoring
  1. Execute steps 1–3 in “Backup”, and then open the “J-6” drive on your computer.
  2. The backup files are copied to the “RESTORE” folder on the “J-6” drive.
  3. Once copying is finished, eject the USB drive from your computer.

  4. Press the [CHORD] button.

    This restores the data.


  5. Once the LED completely stops blinking, turn off the J-6.