OPTION

You can revert the settings of the current drum kit (the kit being edited) to how they were immediately after you selected the drum kit.

Manually reloads the parameters from the SPD-SX PRO back into the SPD-SX PRO APP.

You can change the app’s window size scale to match the display size of your computer.

The scale you set is saved as the setting for the app.

If the window size when you launch the app is larger than your maximum display size, the app is automatically scaled down to fit on your display.
Some parts of the screen layout may get jumbled up when using certain scale settings.

Item	Explanation
LOOP	When LOOP is ON (ON/×2/×4/×8), the LOOP icon appears.
LAYER EQ	“EQ” is shown according to the EQ Info Mode settings.
LAYER TRANSIENT	“TR” is shown according to the Transient Info Mode settings.
SELECTED TAB	Either the LOOP icon, “EQ” or “TR” (TRANSIENT) is shown, depending on which KIT parameter tab is shown below the screen.

Item	Explanation
SWITCH	When “EQ Switch” is ON, “EQ” appears.
PARAMETER	When “EQ Switch” is ON and the “Gain” setting for either the “Low”, “Mid1”, “Mid2” or “Hi” frequency is set to a value other than “0dB”, “EQ” appears. Even if the “Freq” or “Q” are set when “EQ Switch” is ON, “EQ” is not shown when the “Gain” is set to “0dB”.

Item	Explanation
SWITCH	When “Transient Switch” is ON, “TR” is shown.
PARAMETER	When “Transient Switch” is ON and either the “Attack”, “Release” or “Gain” is set to a value other than “0” or “0.0dB”, “TR” is shown. Even when “Transient Switch” is ON and the “Sens” parameter is set, “TR” is not shown when “Attack”, “Release” or “Gain” is set to “0” or “0.0dB”.