Output and effect settings
- Select [MENU] Ó “KIT EDIT1”.
- Use the cursor [à] [á] [ã] [â] buttons to select “OUTPUT/EFFECTS” and press the [ENTER] button.
- The OUTPUT / EFFECTS screen appears.
- Strike to select the pad or trigger that you want to configure.
- Use the cursor [à] [á] buttons to select a parameter, and use the [-] [+] buttons or the [VALUE] knob to edit the value.
Parameter | Value | Explanation |
|---|---|---|
MFX1–4 | (Effect type) | Sets the MFX to be used for MFX1–4. This is shown only if one of the MFX1–4 is set for Output (PAD). |
Output (PAD) | MASTER+PHONES, PHONES-ONLY, MFX1–4, SIDE CHAIN, OFF | These parameters are for selecting the output (connection) destination for each pad, MFX and side chain. Settings available (differs with each parameter): MASTER+PHONES: Outputs to the headphones jack and MASTER OUT jacks (when “Master Direct Sw” is “NORMAL”). PHONES-ONLY: Outputs only to the PHONES jack. No sound is output from the MASTER OUT jacks. MFX1–4: Connects to the MFX 1–4 inputs for each kit. SIDE CHAIN: Connects to the side chain input. OFF: Turns off the output destinations respectively for the pads, MFX and the side chain. When this is set to OFF, “OUTPUT OFF” is shown in the top right-hand corner of the KIT screen. |
Output (MFX1–4) | MASTER+PHONES, PHONES-ONLY, SIDE CHAIN, OFF | |
Output (Side Chain) | MASTER+PHONES, PHONES-ONLY, OFF |
Parameter | Value | Explanation |
|---|---|---|
Direct Output (Pad) | OFF, DIRECT 1, DIRECT 2, DIRECT 1+2 (L+R), DIRECT 3, DIRECT 4, DIRECT 3+4 (L+R), MASTER DIRECT L, MASTER DIRECT R, MASTER DIRECT L+R | Selects the DIRECT OUT output destination for each pad, MFX and side chain. |
Direct Output (MFX1–4) | OFF, DIRECT 1, DIRECT 2, DIRECT 1+2 (L+R), DIRECT 3, DIRECT 4, DIRECT 3+4 (L+R), MASTER DIRECT L, MASTER DIRECT R, MASTER DIRECT L+R | |
Direct Output (Side Chain) | OFF, DIRECT 1, DIRECT 2, DIRECT 1+2 (L+R), DIRECT 3, DIRECT 4, DIRECT 3+4 (L+R), MASTER DIRECT L, MASTER DIRECT R, MASTER DIRECT L+R | |
Side Chain Ctrl | OFF, ON | Turn this on when using the output of each pad as the side chain control signal. |
Button | Explanation |
|---|---|
[F1] (MFX) | Shows the MFX settings screen (MFX 1–4). |
[F2] (SIDE CHAIN) | Shows the SIDE CHAIN settings screen. |
[F3] (MASTER EFFECT) | Shows the MASTER EFFECT settings screen. |
[F4] (MASTER COMP) | Shows the MASTER COMP settings screen. |
[F5] (MASTER EQ) | Shows the MASTER EQ settings screen. |
[F6] (ASSIGN) | Shows the settings screen for the pad and trigger output destinations. |
[SHIFT] + [F5] (SET ALL) | Copies the OUTPUT parameter to multiple PAD/TRIGGER IN/FOOT SW all at once. |
[SHIFT] + [F6] (MFX COPY) | Copies the MFX. |