1. Click the (EDITOR) icon.

    The EDITOR screen appears.



  2. Edit the parameters as desired.

    SYSTEM SETTING
    Parameter Explanation
    AMP/CAB SW

    Turns the amp or cabinet on/off.

    “Turning the amp or cabinet on/off” (IR-2 Owner’s Manual)
    AMBIENCE TYPE

    Sets the ambience type.

    “Setting the ambience type” (IR-2 Owner’s Manual)
    OUTPUT SELECT

    Selects the amp to connect to the IR-2. The sound is optimized for the amp you select.

    “Specifying the amp to connect” (IR-2 Owner’s Manual)
    RETURN MODE

    Set this according to the signal that’s input to the IR-2 RETURN jack.

    “Selecting the input signal for RETURN” (IR-2 Owner’s Manual)


    USB SETTING
    Parameter Explanation
    MODE

    Set this to match the device you’ve connected, so that USB audio works correctly.

    “Setting the USB mode” (IR-2 Owner’s Manual)
    LOOPBACK

    OFF, ON:

    When this is “ON”, the input sound from the computer is looped back to the computer as-is.
    EFX OUT LEVEL

    0–200:

    Adjusts the level of the sound that’s output to the computer after passing through the IR-2 effect.
    MIX IN LEVEL

    0–200:

    Adjusts the level of the sound that’s input from the computer. The input sound from the computer is mixed into the final stage of the IR-2’s signal chain.
    LOOPBACK LEVEL

    0–200:

    Adjusts the level of sound that’s looped back to the computer when LOOPBACK is “ON”.