Here’s how to configure the functions of the footswitch connected to the CTL 1, 2/EXP jack (FS-5U, FS-6, FS-7; sold separately).

  1. Press and hold down the [TAP] switch, and turn on the power.
  2. Set the [MODE SELECTOR] knob to “6” if you wish to set the CTL 1 function, or to “7” if you wish to set the CTL 2 function.

  3. Use the [MEMORY] button to select the function to set.

    MEMORY indicators Function
    MANUAL Select the next memory.
    1 Select the previous memory.
    2 Turn on/off effects.
    3 Press the footswitch at the tempo of the song you’re playing to specify a matching repeat rate.
    4 CTL 1: WARP is on while the switch is pressed.
    CTL 2: TWIST is on while the switch is pressed.


  4. Press the [TAP] switch to exit the function settings.