1. Various Settings

Switching Between TWIST Types (TWIST TYPE)

  1. Press and hold down the [TAP] switch, and turn on the power.
  2. Turn the [MODE SELECTOR] knob to the “2” setting.

  3. Use the [MEMORY] button to select the twist type.

    MEMORY indicators TWIST type Explanation
    MANUAL

    Normal

    		 Produces a typical effect.
    1 Hard Produces a wilder effect.
    2 Natural Produces a natural effect to match the echo you set.
  4. Press the [TAP] switch to exit the settings.
Expand all
  • Index
  • RE-202 Reference Manual
  • Panel Descriptions
    • Top Panel
    • Rear Panel
    • Connecting External Pedals
    • Turning the power on/off
    • Head Combinations for Each Mode
  • Saving and Switching Between Memories
  • Various Settings
    • Setting the Expression Pedal Function
    • Setting the Footswitch Functions (CTL 1 FUNCTION, CTL 2 FUNCTION)
    • Turning the Direct Sound Output On/Off (DIRECT ON/OFF)
    • Switching Between Direct Sounds (DIRECT MODE)
    • Preserving/Muting the Tail of an Effect when the Effect is Switched Off (CARRYOVER)
    • Setting the Operation Mode for the [REPEAT RATE] Knob (TIME MODE)
    • Switching Between Reverb Types (REVERB TYPE)
    • Setting the Maximum Value of MEMORY (MEMORY EXTENT)
    • Switching Between TWIST Types (TWIST TYPE)
    • Tap Settings (TAP SETTING)
    • Set/Do Not Set the Reverb Type for Each Memory (REVERB TYPE PREFERENCE)
    • MIDI Settings
  • Restoring the Factory Default Settings (Factory Reset)
  • Attaching the Rubber Feet
  • Main Specifications