Switching Between Reverb Types (REVERB TYPE)

1. Press and hold down the [TAP] switch, and turn on the power.
2. Turn the [MODE SELECTOR] knob to the “12” setting.

3. Use the [MEMORY] button to select the reverb type.

   MEMORY indicators	Reverb Type
   MANUAL	RE-201 SPRING
   1	HALL
   2	PLATE
   3	ROOM
   4	AMBIENCE

4. Press the [TAP] switch to exit the settings.

Setting a Reverb Type for Each Memory

You can set a reverb type for each memory.

• To set a reverb type for each memory, first change the setting in “Set/Do Not Set the Reverb Type for Each Memory (REVERB TYPE PREFERENCE)” to “1”.

1. Hold down the [MEMORY] switch, and release it once the LED starts blinking.

2. Use the [MEMORY] button to select the reverb type.

   MEMORY indicators	Reverb Type
   MANUAL	RE-201 SPRING
   1	HALL
   2	PLATE
   3	ROOM
   4	AMBIENCE

3. Press the [MEMORY] switch to exit the settings.