1. Press and hold down the [ON/OFF] switch, and turn on the power.
  2. Turn the [MODE SELECTOR] knob to select the parameter to set.
  3. Use the [MEMORY] button to select the setting.

  4. Press the [ON/OFF] switch to exit the settings.

    Setting [MODE SELECTOR] knob Value Indicators that are lit Explanation
    Receive channel (RX CH) 6 OFF MEMORY: MANUAL, HEAD: 1 Off
    1 MEMORY: 1, HEAD: 1 CH. 1
    2 MEMORY: 2, HEAD: 1 CH. 2
    3 MEMORY: 3, HEAD: 1 CH. 3
    4 MEMORY: 4, HEAD: 1 CH. 4
    5 MEMORY: MANUAL, HEAD: 2 CH. 5
    6 MEMORY: 1, HEAD: 2 CH. 6
    7 MEMORY: 2, HEAD: 2 CH. 7
    8 MEMORY: 3, HEAD: 2 CH. 8
    9 MEMORY: 4, HEAD: 2 CH. 9
    10 MEMORY: MANUAL, HEAD: 3 CH. 10
    11 MEMORY: 1, HEAD: 3 CH. 11
    12 MEMORY: 2, HEAD: 3 CH. 12
    13 MEMORY: 3, HEAD: 3 CH. 13
    14 MEMORY: 4, HEAD: 3 CH. 14
    15 MEMORY: MANUAL, HEAD: 4 CH. 15
    16 MEMORY: 1, HEAD: 4 CH. 16
    Transmit channel (TX CH) 7 OFF MEMORY: MANUAL, HEAD: 1 Off
    1 MEMORY: 1, HEAD: 1 CH. 1
    2 MEMORY: 2, HEAD: 1 CH. 2
    3 MEMORY: 3, HEAD: 1 CH. 3
    4 MEMORY: 4, HEAD: 1 CH. 4
    5 MEMORY: MANUAL, HEAD: 2 CH. 5
    6 MEMORY: 1, HEAD: 2 CH. 6
    7 MEMORY: 2, HEAD: 2 CH. 7
    8 MEMORY: 3, HEAD: 2 CH. 8
    9 MEMORY: 4, HEAD: 2 CH. 9
    10 MEMORY: MANUAL, HEAD: 3 CH. 10
    11 MEMORY: 1, HEAD: 3 CH. 11
    12 MEMORY: 2, HEAD: 3 CH. 12
    13 MEMORY: 3, HEAD: 3 CH. 13
    14 MEMORY: 4, HEAD: 3 CH. 14
    15 MEMORY: MANUAL, HEAD: 4 CH. 15
    16 MEMORY: 1, HEAD: 4 CH. 16
    RX MEMORY: 2, HEAD: 4 Transmits on the same channel as the RX CHANNEL.
    Receive program change message (PC IN) 8 ON MEMORY: MANUAL Program change messages are received.
    OFF MEMORY: 1 Program change messages are not received.
    Transmit program change messages (PC OUT) 9 ON MEMORY: MANUAL Program change messages are transmitted.
    OFF MEMORY: 1 Program change messages are not transmitted.
    Receiving control change message (CC IN) 10 ON MEMORY: MANUAL Control change messages are received.
    OFF MEMORY: 1 Control change messages are not received.
    Transmit control change messages (CC OUT) 11 ON MEMORY: MANUAL Control change messages are transmitted.
    OFF MEMORY: 1 Control change messages are not transmitted.
    MIDI clock sync (SYNC) 12 INTERNAL MEMORY: MANUAL

    Operations are synchronized to the RE-202’s internal clock.
    AUTO MEMORY: 1

    Operations are synchronized to the MIDI clock received via MIDI. However, operations are automatically synchronized to the RE-202’s internal clock if the unit is unable to receive the external clock.
    REALTIME SOURCE 1 INTERNAL MEMORY: MANUAL Internal real-time messages are used as the clock source.
    MIDI MEMORY: 1 Real-time messages from the MIDI IN connector are used as the clock source.
    MIDI THRU 2 ON MEMORY: MANUAL Specifies whether MIDI messages received at the MIDI IN connector are retransmitted as-is from the MIDI OUT connector (ON) or are not retransmitted (OFF).
    OFF MEMORY: 1
    DEVICE ID 3 17 MEMORY: MANUAL, HEAD: 1 This sets the MIDI Device ID used for transmitting and receiving Exclusive messages.
    18 MEMORY: 1, HEAD: 1
    19 MEMORY: 2, HEAD: 1
    20 MEMORY: 3, HEAD: 1
    21 MEMORY: 4, HEAD: 1
    22 MEMORY: MANUAL, HEAD: 2
    23 MEMORY: 1, HEAD: 2
    24 MEMORY: 2, HEAD: 2
    25 MEMORY: 3, HEAD: 2
    26 MEMORY: 4, HEAD: 2
    27 MEMORY: MANUAL, HEAD: 3
    28 MEMORY: 1, HEAD: 3
    29 MEMORY: 2, HEAD: 3
    30 MEMORY: 3, HEAD: 3
    31 MEMORY: 4, HEAD: 3
    32 MEMORY: MANUAL, HEAD: 4