This sets whether to preserve (carry over) the tail of an effect after the effect is switched off.

  1. Press and hold down the [TAP] switch, and turn on the power.
  2. Turn the Mode knob to the “MULTI-HEAD” setting.

  3. Use the [MEMORY] button to select the setting.

    MEMORY indicators Function
    MANUAL Reverberation carries over
    1 Reverberation does not carry over

  4. Press the [TAP] switch to exit the settings.
    • This is only supported when the effect is turned on/off. This is not supported when switching between memories.
    • If this function is set to carry over the effect, the self-oscillation of the effect continues to be output, even if the effect is turned off while the effect sound is self-oscillating. To stop the self-oscillating sound, turn the [INTENSITY] knob all the way down.