Setting the Footswitch Functions (CTL 1 FUNCTION, CTL 2 FUNCTION)

Here’s how to configure the functions of the footswitch connected to the CTL 1, 2/EXP jack (FS-5U, FS-6, FS-7; sold separately).

1. Press and hold down the [TAP] switch, and turn on the power.
2. Set the Mode knob to “CLASSIC” if you wish to set the CTL 1 function, or to “VINTAGE” if you wish to set the CTL 2 function.

3. Use the [MEMORY] button to select the function to set.

   MEMORY indicators	Function
   MANUAL	Select the next memory.
   1	Select the previous memory.
   2	Turn on/off effects.
   3	Press the footswitch at the tempo of the song you’re playing to specify a matching delay time.

4. Press the [TAP] switch to exit the function settings.