You can change how the output works by switching between output modes.
You can turn the output of the direct sound off when you want to output only the effect’s sound, such as when you’re connecting this unit to the send/return of a mixer.

  1. Press and hold down the [TAP] switch, and turn on the power.
  2. Turn the Mode knob to the “MODERN” setting.

  3. Use the [MEMORY] button to select the output mode.

    MEMORY indicators Output mode Function

    MANUAL

    NORMAL

    When a plug is inserted into the OUTPUT A/B jacks:
    The effect sound (L ch) + direct sound is output from the OUTPUT A jack, and the effect sound (R ch) + direct sound is output from the OUTPUT B jack.

    When a plug is inserted into the OUTPUT A jack only:
    The effect sound and direct sound are output.

    1

    DIRECT/EFFECT

    When a plug is inserted into the OUTPUT A/B jacks:
    The effect sound (L ch + R ch) is output from the OUTPUT A jack, and the direct sound is output from the OUTPUT B jack.

    When a plug is inserted into the OUTPUT A jack only:
    The effect sound (L ch + R ch) is output from the OUTPUT A jack.

    2

    DIRECT MUTE

    Turns the direct sound output off.

    When a plug is inserted into the OUTPUT A/B jacks:
    The effect sound (L ch) is output from the OUTPUT A jack, and the effect sound (R ch) is output from the OUTPUT B jack.

    When a plug is inserted into the OUTPUT A jack only:
    The effect sound (L ch + R ch) is output from the OUTPUT A jack.
  4. Press the [TAP] switch to exit the function settings.