Before using the GO:PODCAST, adjust the GO:PODCAST’s direction correctly.
Loosen the screws on the sides of the GO:PODCAST.
Don’t loosen the screws too much.
If you loosen the screws too much, they may come off, causing the GO:PODCAST to fall off the stand.
Change the direction of the GO:PODCAST while supporting the stand.
When the directivity is set to “Cardioid (single direction)”, the front of the GO:PODCAST (the side with the knobs) should be facing the sound source. (Don’t point the top part of the mic at the sound source.)
When you swivel the mic, be careful not to get your fingers pinched between the GO:PODCAST and the stand. If small children are present, make sure that an adult provides supervision and guidance.
For details on the directivity settings, see Panel descriptions, “Directivity indicators”.
Tighten the screws on the sides of the GO:PODCAST while holding the GO:PODCAST so that it doesn’t swivel.
Tighten the screws so that the GO:PODCAST doesn’t swivel.
Overtightening the screws may damage the GO:PODCAST and the stand.