Switching between patterns

  1. Press the [PATTERN] button.

    The [PATTERN] button lights up, and the buttons are in pattern select mode.
    The step buttons function as pattern numbers 1–16.

    Pattern

    Explanation

    Playing

    Lit

    Playing next (up next)

    Blink

    Pattern exists

    Lights up dimly

    Pattern does not exist

    Unlit



  2. Press a step button.

    The selected pattern plays next (set as “up next”).
    The rhythm and bass pattern numbers are recalled as a set.


Switching between banks

  1. Hold down the [PATTERN] button and press a step button.

    The unit enters bank select mode.
    The four leftmost step buttons function as bank numbers 1–4.
    Press a step button to change to the indicated bank.


Saving a pattern

  1. Hold down the [SHIFT] button and press the [SLIDE (WRITE)] button.

  2. Use the [TEMPO/VALUE] knob to select what to save.


    Ptn Saves the currently selected pattern.
    ALL Saves all patterns.



  3. Press the [C# (ENTER)] button.

    This saves the pattern(s).


  • Once the power is turned off, any unsaved patterns are reset to their last saved state.
Setting the tempo

The tempo is always shown on the display.

  1. Turn the [TEMPO/VALUE] knob.

  2. Hold down the [SHIFT] button and turn the [TEMPO/VALUE] knob to fine-tune the value in decimal points.

    The tempo settings are common to all patterns, and are saved in this unit.