Configuring the delay
Adjusting the delay volume and feedback

  1. Turn the [DELAY] knob.
Setting the delay time

  1. Hold down the [SHIFT] button and turn the [DELAY] knob.

    When Delay Sync is ON, the following text is displayed when you turn the [DELAY] knob.
    1_32: Thirty-second note
    16t: Sixteenth-note triplet
    32d: Dotted thirty-second note
    1_16: Sixteenth note
    8t: Eighth-note triplet
    16d: Dotted sixteenth note
    1_8: Eighth note
    4t: Quarter-note triplet
    8d: Dotted eighth note
    1_4: Quarter note
    2t: Half-note triplet
    4d: Dotted quarter note
    1_2: Half note
    1t: Whole-note triplet
    2d: Dotted half note
    1_1: Whole note


Setting how much signal is sent to the delay

  1. Hold down the [SHIFT] button and press the [C (DELAY)] button.

    “d.Snd” is displayed.


  2. Press the button of the instrument you want to set.

    The current value (0–127) is shown on the display.

    * Press the [ACCENT] button to set the send amount for the signal received via USB.


  3. Turn the [TEMPO/VALUE] knob to set the send amount.
  4. When you are finished, press the [C (EXIT)] button.


Configuring the reverb
Adjusting the reverb volume

  1. Turn the [REVERB] knob.
Setting the reverb time

  1. Hold down the [SHIFT] button and turn the [REVERB] knob.
Setting how much signal is sent to the reverb

  1. Hold down the [SHIFT] button and press the [OCT- (REVERB)] button.

    “r.Snd” is displayed.


  2. Press the button of the instrument you want to set.

    The current value (0–127) is shown on the display.

    * Press the [ACCENT] button to set the send amount for the signal received via USB.


  3. Turn the [TEMPO/VALUE] knob to set the send amount.
  4. When you are finished, press the [C (EXIT)] button.