1. Operating the channels

Using an external footswitch to switch between channels

You can use a footswitch (FS-5U, FS-6, FS-7; sold separately) connected to the CH SEL jack to switch between channels.

When a footswitch is connected, the pedal switch only activates the bypass function.


  • When a stereo cable is connected to A & B (jacks) on the FS-6 or FS-7, use pedal switch B.



Expand all
  • Index
  • IR-2 Owner’s Manual
  • Panel descriptions
    • Amp/cabinet list
  • Using the IR-2
  • Specifying the amp to connect
  • Operating the channels
    • Switching between the channels
    • Using an external footswitch to switch between channels
    • Editing and saving tones
  • Turning the amp or cabinet on/off
  • Setting the ambience type
  • Selecting the input signal for RETURN
  • Setting the USB mode
  • Restoring the factory settings (Factory Reset)
  • Changing the battery
  • Main Specifications
    • IMPORTANT NOTES
    • Intellectual Property Right