When you operate a knob, the edited setting is immediately applied to the sound.
When you’ve edited the sound saved to a channel by operating the knobs, the sound is automatically saved to the channel that’s currently selected.

However, the settings are not saved if you switch between channels or turn the power off right after editing.
To make sure that the settings are properly saved, wait about two seconds before you switch between channels or turn off the power.


Example of editing and saving

  1. For the green channel, turn the type knob to “BRIT”, and adjust the settings of the various knobs.

    This sound is automatically saved to the green channel.


  2. Press the pedal switch to select the red channel.

    This recalls the sound for the red channel.


  3. Turn the type knob to “BROWN”, and adjust the settings with the various knobs.

    This sound is automatically saved to the red channel.


  4. Press the pedal switch to select the green channel.

    The “BRIT” sound that you made the settings for in step 1 is recalled.

  • The sound for the channel you select is recalled when you switch between channels, so the current knob position may not reflect what you hear.