This shows you how to return the SL-2 to its factory settings.

  1. Turn the type knob to “DUAL (3)”.

  2. Turn the other knobs besides the type knob all the way clockwise.

  3. While holding down the pedal switch, turn on the power by inserting a plug into the INPUT A (MONO) jack.

    The CHECK indicator blinks orange.

  4. Press the pedal switch.

    The CHECK indicator rapidly blinks orange.

    Once the CHECK indicator lights up orange continuously, the SL-2 is restored to its factory settings.

  5. Turn off the power (unplug the cable from the INPUT A (MONO) jack).

    This sets the SL-2 as follows.

    Parameter

    Value

    OUTPUT MODE

    →Selecting Various Ways of Outputting the Effect Sound (OUTPUT MODE)

    FIXED (1)

    CTL FUNCTION

    →Assigning Functions to a Footswitch (CTL FUNCTION)

    MOMENTARY/TAP TEMPO (1)

    EXP FUNCTION

    →Controlling the Knobs Using an Expression Pedal (EXP FUNCTION)

    TEMPO (3)

    MIDI CH

    →Setting the MIDI Receive Channel

    All channels (11)