Here’s how to set the channel used for receiving MIDI messages from a MIDI device.

  1. Turn the type knob to “DUAL (4)”.

  2. Turn the other knobs besides the type knob all the way clockwise.

  3. While holding down the pedal switch, turn on the power by inserting a plug into the INPUT A (MONO) jack.

    The CHECK indicator lights up red.

  4. Use the [VARIATION] knob to select the receive channel.

    [VARIATION] knob

    Explanation

    1

    		 1 ch

    2

    2 ch

    3

    3 ch
    4 4 ch
    5 5 ch
    6 6 ch
    7 7 ch
    8 8 ch
    9 9 ch
    10 10 ch
    11 All channels

  5. Press the pedal switch.

    The settings are saved.

    The CHECK indicator rapidly blinks green.

    The device can be used normally after around two to three seconds.