This effect allows the left/right signals that have similar phase to be tonally adjusted in a different way than the left/right signals that have different phase.

Parameter

Value

Explanation
M EQ Switch (*1) OFF, ON

Switches whether to apply tonal adjustment to left/right input signals that are nearly (or fully) in phase.
M Input Gain -12.00–+12.00 [dB]

Volume of left/right input signals that are nearly (or fully) in phase
M Low Frequency 20, 25, 31, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400 [Hz]

Frequency of the low range
M Low Gain -12.00–+12.00 [dB]

Gain of the low range
M Mid1 Frequency 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]

Frequency of the middle range 1
M Mid1 Gain -12.00–+12.00 [dB]

Gain of the middle range 1
M Mid1 Q 0.5, 1.0, 2.0, 4.0, 8.0

Width of the middle range 1
Set a higher value to narrow the range to be affected.
M Mid2 Frequency 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]

Frequency of the middle range 2
M Mid2 Gain -12.00–+12.00 [dB]

Gain of the middle range 2
M Mid2 Q 0.5, 1.0, 2.0, 4.0, 8.0

Width of the middle range 2
Set a higher value to narrow the range to be affected.
M Mid3 Frequency 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]

Frequency of the middle range 3
M Mid3 Gain -12.00–+12.00 [dB]

Gain of the middle range 3
M Mid3 Q 0.5, 1.0, 2.0, 4.0, 8.0

Width of the middle range 3
Set a higher value to narrow the range to be affected.
M High Frequency 2000, 2500, 3150, 4000, 5000, 6300, 8000, 10000, 12500, 16000 [Hz]

Frequency of the high range
M High Gain -12.00–+12.00 [dB]

Gain of the high range
S EQ Switch OFF, ON

Switches whether to apply tonal adjustment to left/right input signals whose signals are considerably out of phase.
S Input Gain -12.00–+12.00 [dB]

Volume of left/right signals whose signals are considerably out of phase
S Low Frequency 20, 25, 31, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400 [Hz]

Frequency of the low range
S Low Gain -12.00–+12.00 [dB]

Gain of the low range
S Mid1 Frequency 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]

Frequency of the middle range 1
S Mid1 Gain -12.00–+12.00 [dB]

Gain of the middle range 1
S Mid1 Q 0.5, 1.0, 2.0, 4.0, 8.0

Width of the middle range 1
Set a higher value to narrow the range to be affected.
S Mid2 Frequency 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]

Frequency of the middle range 2
S Mid2 Gain -12.00–+12.00 [dB]

Gain of the middle range 2
S Mid2 Q 0.5, 1.0, 2.0, 4.0, 8.0

Width of the middle range 2
Set a higher value to narrow the range to be affected.
S Mid3 Frequency 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]

Frequency of the middle range 3
S Mid3 Gain -12.00–+12.00 [dB]

Gain of the middle range 3
S Mid3 Q 0.5, 1.0, 2.0, 4.0, 8.0

Width of the middle range 3
Set a higher value to narrow the range to be affected.
S High Frequency 2000, 2500, 3150, 4000, 5000, 6300, 8000, 10000, 12500, 16000 [Hz]

Frequency of the high range
S High Gain -12.00–+12.00 [dB]

Gain of the high range
Level 0–127

Output Level

*1: This parameter corresponds to MFX Ctrl. For details, refer to “Steuern des MFX mit den PAD EDIT [1] [2]-Reglern (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Steuern des MASTER EFFECT mit dem MASTER EFFECT-Regler (MASTER EFFECT CTRL)”.