You can use the “BRIDGE CAST” dedicated app to access more detailed settings. For details, refer to “About the BRIDGE CAST App”.



MIC EFFECTS area

These are the settings for the mic effects and for the mics that you use.


  1. MIC EFFECTS [ON] button

    Turns the mic effects (voice changer, reverb) on/off. When on, the button is lit.

    Voice changer Alters the pitch and tonal quality of your voice.
    Reverb Adds reverberation to the sound.


    Selecting the type of mic to use

    The type of mic to use must be set in order to input audio from a mic.

    Hold down the MIC EFFECTS [ON] button and turn the CH [2] knob.

    CH [2] knob

    Type of mic
    Turn counterclockwise (the left half of the level meter lights up)

    Dynamic mic (when phantom power is off)

    Condenser mic (when phantom power is on)
    Clockwise (the right half of the level meter lights up)

    Headset

    â BRIDGE CAST app: Selecting the type of mic to use


    Adjusting the input gain (sensitivity) for the mic 

    Hold down the MIC EFFECTS [ON] button and turn the CH [1] knob.

    â BRIDGE CAST app: Adjusting the input gain (sensitivity)


    Supplying phantom power (+48 V) to the MIC connector

    Long-press both the MIC EFFECTS [ON] and MIC EFFECTS [SELECT] buttons at the same time to switch phantom power on/off.

    When you press the buttons at the same time, the MIC EFFECTS 1–5 indicators all light up or go dark, and the current phantom power setting is indicated.

    MIC EFFECTS 1–5 indicators Phantom power
    All unlit Off
    All lit On
    • Make sure that phantom power is turned off when you connect a dynamic mic. Dynamic mics may malfunction when supplied with phantom power.

  2. MIC EFFECTS [SELECT] button

    This recalls a mic effect preset. Each press of the button cycles between settings 1 through 5 in order.

    About the presets

    You can customize the mic effect settings and overwrite the presets when using the BRIDGE CAST app.

    â Saving the Mic Effect Settings as a Preset

  3. MIC EFFECTS 1–5 indicators

    The preset number of the currently selected mic effect lights up.


  4. [PITCH] knob

    Edits the voice changer pitch (how high or low your voice sounds).

    â BRIDGE CAST app: Changing the audio (Voice Changer)


  5. [FORMANT] knob

    Edits the voice changer formant (the character of your voice).

    â BRIDGE CAST app: Changing the audio (Voice Changer)


EQ area

Use the equalizer to adjust the game sound that’s input from the USB port (input source: GAME*1).

*1: The equalizer is only applied to the game sound that’s sent to the PERSONAL MIX bus. When the connection setting for the USB port is “CONSOLE/MOBILE”, the input source is “USB”.


  1. EQ [SELECT] button

    Recalls the equalizer presets. Each press of the button cycles between settings 1–5 and OFF in order.

    About the presets

    You can customize the equalizer settings and overwrite the presets when using the BRIDGE CAST app.

    â Saving the Equalizer Settings as a Preset

  2. EQ 1–5 indicators

    The preset number of the currently selected equalizer lights up.



Mixer area

Use this area to adjust the input sources assigned channels 1–4, and the respective output volumes.

The input/output settings are configured for each bus (STREAM MIX, PERSONAL MIX).

About the buses

“Buses” refer to the destinations where the audio for each input source is sent.

There are two kinds of buses on this unit, the “STREAM MIX” bus and the “PERSONAL MIX” bus. The STREAM MIX bus can be used for streaming settings, whereas the PERSONAL MIX bus can be used for monitoring settings. Configure each bus according to your needs.

The audio sent to the buses is output as a mix.

  • The mic audio can be output without going through a bus (meaning that the mic audio is not mixed with other audio). The mic audio can be used for voice chats.


  1. CH [1]–[4] knobs

    These adjust the volume of the input sources assigned to each channel.

    Set the input sources from “CHANNEL” Ó “CH.1”–“CH.4” Ó “SOURCE” in the menu screen of the BRIDGE CAST app.

  2. CH 1–4 color indicators

    These blink when a channel is muted.

    • You can change the indicator colors. Set this from “CHANNEL” Ó “CH.1”–“CH.4” Ó “LED COLOR” in the menu screen of the BRIDGE CAST app.

  3. CH 1–4 level meters

    These indicate the input level for each channel. The volume is shown instead when you operate the CH [1]–[4] knobs.

    • You can disable the level meters so that only the volume is shown. The level meter display setting is in the menu screen of the BRIDGE CAST app, accessed from “SYSTEM” Ó “INDICATOR TYPE”.


  4. CH 1–4 bus selection indicators

    These indicators light up and go dark to indicate which bus each channel operates.

    Select the bus used for each channel by using the bus selection buttons.

    Lit STREAM MIX bus
    Unlit PERSONAL MIX bus


    When the input source is “MIC” (mic audio)

    The buses are switched as followed.

    Lit

    STREAM MIX bus

    		 –
    Unlit

    PERSONAL MIX bus

    Set which bus to use from the white bar inside the bus selection indicator, in the level meter screen of the BRIDGE CAST app.

    Mic audio (not routed through a bus)

  5. MUTE/ASSIGN [1]–[4] buttons

    Use these buttons to mute the audio and to execute the functions assigned to the buttons.

    Set the functions for the MUTE/ASSIGN [1]–[4] buttons from “CHANNEL” Ó “CH.1”–“CH.4” Ó “MUTE/ASSIGN”, in the menu screen of the BRIDGE CAST app.


    MUTE/ASSIGN 1–4 indicators

    These indicators go dark when the mute function assigned to the MUTE/ASSIGN [1]–[4] buttons is turned on.

  6. [STREAM] knob

    Adjusts the STREAM MIX bus volume that’s output from the USB port.

  7. [LINE OUT] knob

    Adjusts the volume of audio that’s output from the LINE OUT jack.

  8. [MIX LINK] button

    Links/unlinks the two buses (STREAM MIX, PERSONAL MIX). When linked, the button lights up.

    When the link is on, you can adjust the input level while retaining the volume balance for each bus.

    • When the input source is “MIC”, the MIC audio (not routed through a bus), STREAM MIX bus and PERSONAL MIX bus are linked.


  9. Bus selection buttons

    These buttons switch between the buses (STREAM MIX, PERSONAL MIX) to be used. The buses to be output to headphones/headset change at the same time.

    The buttons light up and go dark to indicate which bus is being used.

    Lit STREAM MIX bus
    Unlit PERSONAL MIX bus
    • The CH 1–4 bus selection indicators also light up or go dark in tandem.

  10. [PHONES] knob

    Adjusts the volume of the headphones/headset.

    You can change the maximum volume of the headphones/headset.

    Set this from “SYSTEM” Ó “PHONES GAIN” in the menu screen of the BRIDGE CAST app.

    • Change this setting only after turning the headphones/headset volume all the way down.