Connectors
MIC 1, 2 jacks

Combo type (XLR, 1/4-inch TRS phone), balanced, phantom power (DC 48 V, 4 mA Max)

LINE IN jack Stereo miniature type
MONITOR OUT jack RCA phono type
PHONES/HEADSET jack

Stereo miniature type (stereo, CTIA-type)

DC IN 5V port USB Type-C®
DEVICE port USB Type-C®
Controller

MIC 1 LEVEL fader

MIC 2 LEVEL fader

LINE IN LEVEL fader

MAIN LEVEL fader

MIC 1 COMP/LIMITER knob

MIC 2 COMP/LIMITER knob

MIC 1 GAIN knob

MIC 2 GAIN knob

LOOP BACK knob

HEADSET/ONBOARD MIC knob

REVERB knob

LIP SYNC DELAY knob

PHONES/HEADSET knob

MIC 1 +48V switch

MIC 2 +48V switch

Indicator

POWER

DEVICE

SIG/PEAK

Nominal Input Level MIC 1, 2 jacks -60 to +4 dBu (Maximum input level: +24 dBu)
LINE IN jacks -10 dBu (Maximum input level: +10 dBu)
Input Impedance MIC IN 1, 2 jacks

10 kΩ (ANALOG GAIN < 24 dBu)

5 kΩ (ANALOG GAIN ≧ 24 dBu)

LINE IN jacks 15 kΩ
Nominal Output Level

MONITOR OUT jacks -10 dBu (Maximum output level: +10 dBu)
PHONES/HEADSET jack 15 mW + 15 mW (32 Ω load)
Output Impedance MONITOR OUT jacks 1 kΩ
Audio Effects Delay, Reverb, HPF, Noise Gate, De-Esser, Compressor, Limiter
Power Supply

USB AC adaptor (commercially available)

  • Recommended to use an USB AC adaptor that can supply 5V, 1.0 A or more.
USB Bus power
Current Draw

700 mA (AC adaptor)

500 mA (USB bus power)

Operation Temperature

+0 to +40 degrees Celsius

+32 to +104 degrees Fahrenheit

Dimensions

220 (W) x 166 (D) x 60 (H) mm

8-11/16 (W) x 6-9/16 (D) x 2-3/8 (H) inches

Weight (without cables)

600 g

1 lb 6 oz

Accessories

Leaflet “Read Me First” 

USB Type-C to Lightning cable

USB Type-C to USB Type-A cable

  • 0 dBu = 0.775 Vrms