1. Example: Connecting the VRC-01 to an External Device

Using as a Computer Audio Interface

You can use the loopback feature when connected to a computer. Turn the [LOOPBACK] knob clockwise as necessary and adjust the input level from the computer.

  • You can power the VRC-01 via bus power. For details, refer to “Using the VRC-01 as a USB Audio Interface”.

Expand all
  • AeroCaster VRC-01 Owner’s Manual (Version 1.05 and later)
  • Panel Descriptions
    • Top Panel
    • Rear Panel
    • Side Panel
  • Connecting the Equipment
    • Connect the Included USB Cable
    • Powering the Unit (Turning on the Power)
    • Connecting to an iPad with a Lightning Port
      • Using an iPad (with Lightning port) While Charging
    • Connecting to an iPad with a USB Type-C Port
      • Using an iPad (with USB Type-C port) While Charging
    • Connecting Headphones or a Headset
    • Connecting a Microphone
    • Connecting to Monitor Speakers
    • Connecting to an Audio Player
  • Audio Operations
    • Adjusting the Input Gain (Sensitivity)
    • Adjusting the Volume Balance
    • Removing Noise from an Audio Signal (Noise Gate)
    • Adding Reverb Only to the Mic Audio
  • Using the VRC-01 as a USB Audio Interface
  • Example: Connecting the VRC-01 to an External Device
    • Using with the AeroCaster LIVE App (Using an iPad with a Lightning Port)
    • Using with the AeroCaster LIVE App (Using an iPad with an USB Type-C Port)
    • Using with the AeroCaster LIVE App with a Roland Video Switcher
    • Using as a Computer Audio Interface
    • Using as a Standalone Mixer
  • Main Specifications