| Error messages | Explanation | Action |
|---|---|---|
Battery Low! |
The batteries are nearly depleted. |
Replace the batteries, or switch to an AC adaptor. |
| Unsupported FILE | The file type is not supported on this unit. | Check the file extension, format and folder directory. |
No SD CARD! |
No SD card is inserted. Also, the SD card might not be fully inserted. |
Turn off the power, and make sure that the SD card is fully inserted before you turn the power back on. |
| Unsupported SD Card! | An unsupported type of SD card has been inserted. | Please format the SD card. |
SD CARD Protected! |
The write-protect feature has been enabled on the SD card. |
Unlock the lock switch on the left side of the SD card. |
SD CARD Full! |
The SD card has run out of free space. |
Delete any unneeded data on the card. |
Internal Storage Full! |
There is not enough storage capacity left on this unit. |
Delete any unneeded data on the unit. |
Storage Error! |
A problem has occurred with the internal storage. |
Try performing a factory reset. |
| Protected! | The function can’t be executed because bank protect is enabled. |
Use a bank for which bank protect is disabled, or disable bank protect on the currently selected bank. → “Selecting a Sample Bank” “Selecting a Pattern Bank” “Protecting a Sample (PROTECT)” “Protecting a Pattern (PROTECT)” |
| Max Length Pattern | The maximum number of notes that can be recorded to the pattern sequencer has been exceeded. |
Reduce the number of notes in the pattern, or shorten and split the pattern to record. → “Creating a New Pattern (Real-time Recording)” “Creating a New Pattern (TR-REC)” |