You can assign the effects you like to the effect buttons on the top panel.
  1. Hold down the [SHIFT] button and press the pad [13].
    The UTILITY MENU screen appears.

  2. Use the [VALUE] knob to select “EFX SET”, and press the [VALUE] knob.

    The effect setting screen appears.


    From the top screen, you can also make this screen appear by pressing pad [16] while holding down the [SHIFT] button.

  3. Turn the [CTRL 3] knob to select “DIRECT”.

  4. Use the [VALUE] knob to select the effect button to which the effect is to be assigned.


    Effect button to assign Parameter
    [FILTER+DRIVE] button  Direct FX1
    [RESONATOR] button  Direct FX2
    [DELAY] button  Direct FX3
    [ISOLATOR] button  Direct FX4
    [DJFX LOOPER] button  Direct FX5

    You can also press an effect button to change its assigned effect.

  5. Press the [VALUE] knob.
    The value display is highlighted, and you can now change the effects.

  6. Use the [VALUE] knob to select the effect, and press the [VALUE] knob.

    The effect is assigned to the effect button you selected. After this, you can use the effect buttons on the top panel to switch the assigned effects on/off.

  7. To finish making settings, press the [EXIT] button.