If there is a timing discrepancy between the video and audio, you can correct the output timing by delaying the audio output.


  1. Tap the “AUDIO” tab and set the audio delay time using the “DELAY” parameter.

     

    Value Explanation
    A

    Auto mode:

    This measures the delay time of the video transmitted from the satellite camera, and uses the measured value as the delay time.

    • After launching the AeroCaster LIVE app, the video from the first satellite camera that was connected is used for measurement.
    • If a satellite camera is not connected, the delay time is set to “0.0 sec”.
    M

    Manual mode:

    Tap the  (slider icon) on the left side Ó adjust the delay time (0.0–1.0 sec) using the slider.


The maximum audio delay time that you can set is one second when set with the VRC-01 ([LIP SYNC DELAY] knob), and one second on the AeroCaster LIVE app, for a total of two seconds.