When you want to save a memory you have created, save it as a user memory by following the procedure below. If you do not save the memory, the edited settings will be lost when you turn off the power or switch to another memory.

  1. Press the [WRITE] button.

  2. Touch <WRITE> (or press the [1] knob).

  3. Use knob [1] to select the save-destination (U01-1–U50-4).

    Hold down knob [1] and then turn it to move between banks.
    You can use knobs [2]–[4] to edit the name.
    To edit the memory name, use the PAGE [÷] [ø] buttons to move the cursor and use the [SELECT] knob to change the character.

    Operation Function
    Turn the [2] knob Selects the type of characters
    Turn the [3] knob Switch uppercase/lowercase
    Press the [3] knob Delete one character (delete)
    Turn the [SELECT] knob Changes the character
    Press the [4] knob Insert one space (insert)

    Press the [÷] [ø] buttons

    		 Moves the cursor
    Touch <DELETE ALL> Delete all characters


  4. Touch <EXECUTE WRITE> on the screen. (Or press the [WRITE] button.)
List of WRITE MENU functions
Menu Function
WRITE Saves the memory you created.
EXCHANGE

On the GX-100, you can “swap” or exchange the positions of two User memories.
INITIALIZE You can restore (initialize) each effect in a user memory to its standard settings. This is useful when you want to create a new memory from scratch.
INSERT

You can insert a memory into any position of the user memories.

For example, if you insert memory U01-1 at U02-1, memory U02-1 and subsequent memories are shifted (renumbered) backward by one. (Memory U02-1 becomes U02-2.)