On the GX-100, you can use MIDI to perform the following operations.

  • For details on MIDI, refer to “GX-100Parameter Guide.”
Operations from the GX-100
Operation Explanation
Transmit program change messages

When you select a memory  on the GX-100, the program change message specified by MEMORY MIDI is also transmitted. The external MIDI device that receives this program change message will switch to the corresponding settings.
Transmit control change messages When you operate the [C1]–[C2] switches or the footswitches or expression pedals connected to the CTL 3, 4/EXP 2 jack, this is output as a control change message. These messages can control parameters on an external MIDI device.
Operations from an External MIDI Device
Operation Explanation
Switch memory  numbers

When the GX-100 receives a program change message from an external MIDI device, the GX-100 will change memories.
Receiving Control Change messages

The GX-100 can receive control change messages to control a specified parameter while you perform.
Receive data

The GX-100 can receive data that is transmitted from another GX-100 unit, or data that was saved on a MIDI sequencer.
Connection example

Settings
  1. Following the steps in “Basic MENU Operations,” select the sub-menu item in [MENU] Ó <MIDI> Ó.
  2. If you’ve selected “MIDI SETTINGS” in the sub-menu, drag the parameter icon up/down to change the value.

    If you’ve selected “PROGRAM MAP” in the sub-menu, use knobs [1]–[4] to change the values.