| Step buttons | Item | Value | Explanation |
|---|---|---|---|
| [1] | Gain | -18, -12, -6, 0, 6, 12 (dB) | Sets the gain (amplitude) of the waveform. |
| [2] | bEnd | OFF, On | Sets whether MIDI pitch bend messages are received (ON) or not (OFF). This is set for each layer that’s selected as ACTIVE (the [TONE A]–[TONE D] buttons blink). |
| [3] | Nod.L | L2.50–L1.50 | Sets the depth of vibrato that is controlled by the modulation lever. When this is set for LFO1, the LFO1 waveform is used for vibrato; and when this is set for LFO2, the LFO2 waveform is used for vibrato. Set this to “0” to turn vibrato off. |
| [4] | AFt.b | OFF, On | Sets whether MIDI aftertouch bend messages are received (ON) or not (OFF). The pitch changes when a MIDI aftertouch message is received. This is set for each layer that’s selected as ACTIVE (the [TONE A]–[TONE D] buttons blink). |
| [5] | AFt.S | L2.50–L1.50 | This sets the depth of vibrato that is controlled by aftertouch. When this is set for LFO1, the LFO1 waveform is used for vibrato; and when this is set for LFO2, the LFO2 waveform is used for vibrato. Set this to “0” to turn vibrato off. |