Your sequencer performance is saved in a memory called a “pattern.” You can recall all kinds of performance patterns by selecting (switching between) the patterns.
The patterns are organized by group (A, B), bank (1–8) and number (1–8), letting you save a total of 2 × 8 × 8 = 128 patterns.
Select the pattern to play back or edit by following the steps below.
Hold down the [START] button and press the BANK [1]–[8] buttons.
This selects the bank.
You can select the group (A/B) by holding down the [START] button and repeatedly pressing the BANK [1]–[8] buttons.
Hold down the [START] button and press the NUMBER [1]–[8] buttons.
This selects the pattern.
- You can also turn the [VALUE] knob while holding down the [SHIFT] button to select the bank and pattern.
- When you press the [EXIT] button while holding down the [START] button, the [START] button remains in a pressed-down state. In this case, you can still select banks and patterns even if you take your finger off the [START] button. To cancel the selection, press the [EXIT] button.