The sequencer has two parts (PART A and PART B), to which you can individually record a sequence. Here we select the part for recording notes.
Hold down the [COMMON] button and press the [EFFECTS] button to turn off sequencer mode (the LEDs of both buttons go dark).
Press the [COMMON] button.
A menu appears.
Turn the [VALUE] knob to select “PArt,” and press the [VALUE] knob.
- Turn the [VALUE] knob to select “SEL,” and press the [VALUE] knob.
Turn the [VALUE] knob to select the part, and press the [VALUE] knob.
This selects the part to record.
|
By holding down the [NOTE] button and pressing the [TONE A] or [TONE B] button, the unit switches to that part, regardless of the current mode.
|
