These are the settings for the brightness of the indicators on the BRIDGE CAST X as well as for what the level meters display.


  1. On the menu screen, click the “SYSTEM” tab and set the parameters in the respective menus.


    Menu Value Explanation

    LED BRIGHTNESS

    		 0–7

    Adjusts the brightness of all indicators.

    • Even with the minimum setting of “0”, the indicators do not go completely dark.

    INDICATOR TYPE

    		 Sets what is shown by the CH 1–4 level meters.
    LEVEL

    The volume is always shown.
    METER

    The level meters operate as a level meter that shows the input levels for each channel.

    The volume is shown instead when you operate the CH [1]–[4] knobs on this unit.

    MUTE DISPLAY

    		 When mute is on, this sets how the color indicators light up.
    BLINK The color indicators blink.
    OFF The color indicators go dark.

    PHONES GAIN

    Normal

    Boost 1

    Boost 2

    When this is set to “Boost 1” or “Boost 2”, this amplifies the headphone volume.
    HDCP

    		 Specifies whether HDCP is enabled (ON) or disabled (OFF).
    ON Copy-protected (HDCP) video can be input. HDCP is also added to the video that is output.
    • Video is not output from the USB II port.
    • Audio is not output from the USB I and II ports.
    OFF Video is output without adding copy protection (HDCP). Note that you cannot input copy-protected video to this unit.
    USB VIDEO FORMAT

    		 Sets the formats that can be selected from the output destination’s livestreaming app.
    YUY2 & MJPEG YUY2 and Motion JPEG can be selected.
    YUY2 Only YUY2 can be selected.

    HDMI IN CAPABILITY MODE (EDID)

    Selects the HDMI formats (resolution and frame rate) that can be inputted to the BRIDGE CAST X. The selected formats (EDID) are transmitted to the device that’s connected to the HDMI IN connector.

    • To output a video signal with a frame rate of 60 Hz or greater to HDMI THRU, select either “DISPLAY THRU” or “MERGED”. Note that video is not output from the USB II port in this case.

    INTERNAL-DEFAULT

    Video format that can be output from the USB II port

    INTERNAL-4K

    Video format that can be output from the USB II port, in 4K (2160p)

    INTERNAL-2K

    Video format that can be output from the USB II port, in 2K (1080p)

    DISPLAY THRU

    A format that can be received by a monitor connected to the HDMI THRU connector

    MERGED

    A format that includes both the “INTERNAL-DEFAULT” and “DISPLAY THRU” formats
    [UPDATE] button –

    Updates the system program of the BRIDGE CAST X. Click the [UPDATE] button and follow the instructions shown.

    Make sure to use the computer that’s connected to the USB II port when updating.