This shows you how to set the delay time for the output audio and modify the audio that’s output from the LINE OUT jack and USB port.


  1. On the menu screen, click the “OUTPUT” tab and set the parameters in the respective menus.


    Menu Value Explanation
    DELAY Off, On

    Turns the delay on/off. When this is “On”, the audio output is delayed by the specified time.

    • Delay is applied to the STREAM MIX bus audio that’s output from the USB port.

    Correcting timing discrepancies between video and audio

    When streaming games on your computer, you might notice that what you see on the game screen is not in sync with the game sound (the audio signal that’s input from the BRIDGE CAST X to your computer). By applying delay to the audio output, you can make the timing of the video and audio match.
    0.0–1000.0 ms

    Adjusts the delay time (audio latency).

    LINE OUT MODE

    		 This selects the audio to be output from the LINE OUT jack.
    MIC

    Mic audio (not routed through a bus)
    STREAM MIX STREAM MIX bus audio
    PHONES SYNC Same audio as the headphones output

    USB OUT MODE (MOBILE/CONSOLE)

    		 When the connection setting for the USB I port is “MOBILE/CONSOLE” or the connection setting for the USB II port is “MOBILE”, this sets the audio that’s output from the USB port or ports.
    MIC Mic audio (not routed through a bus)
    STREAM MIX STREAM MIX bus audio