Here’s how to set the type of mic used and the mic input gain (sensitivity).


â Selecting the type of mic

â Adjusting the input gain (sensitivity)


Selecting the type of mic

  1. On the menu screen, click the “MIC SETUP” tab and set the “MIC TYPE”.


    Menu Value Explanation

    MIC TYPE

    		 Select a mic type according to the mic you’re using.
    XLR

    Dynamic mic, condenser mic

    • When a condenser mic is connected, set the rear panel phantom power switch to “48 V”. Doing so supplies phantom power, and [48V] is shown in blue onscreen.
    • When connecting a dynamic mic or a condenser mic that operates on battery power, make sure to set the phantom power switch to “OFF”. These types of mics may malfunction when supplied with phantom power.
    HEADSET Headset


Adjusting the input gain (sensitivity)

Here’s how to adjust the mic’s input gain so that the input audio is at the appropriate level.


  1. On the menu screen, click the “MIC SETUP” tab and speak into the mic while adjusting the “GAIN”.

    Raise the input gain as high as possible, while making sure that the waveform in the graph stays within the blue area.