- Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
Use the [VALUE] knob to select “EFX SET,” and press the [VALUE] knob.
The effect setting screen appears.
From the top screen, you can also make this screen appear by pressing pad [16] while holding down the [SHIFT] button.
Turn the [CTRL 3] knob to select “DIRECT.”
Use the [VALUE] knob to select the effect button to which the effect is to be assigned.
Effect button to assign Parameter [FILTER+DRIVE] button Direct FX1 [RESONATOR] button Direct FX2 [DELAY] button Direct FX3 [ISOLATOR] button Direct FX4 [DJFX LOOPER] button Direct FX5 You can also press an effect button to change its assigned effect.
Press the [VALUE] knob.
The value display is highlighted, and you can now change the effects.
Use the [VALUE] knob to select the effect, and press the [VALUE] knob.
The effect is assigned to the effect button you selected. After this, you can use the effect buttons on the top panel to switch the assigned effects on/off.
To finish making settings, press the [EXIT] button.
You can assign the effects you like to the effect buttons on the top panel.