List of Shortcut Keys

You can quickly recall a desired function or screen by pressing a button or pad while holding down the [SHIFT] button.

Shortcuts that use the [SHIFT] button

While holding down the [SHIFT] button	Function	Explanation
Bank [A/F]–[E/J] buttons	BANK VOLUME	Adjusts the volume for the specified bank overall. → “Adjusting the Volume for All Banks (BANK VOLUME)”
[COPY] button	BANK PROTECT	This function prevents the samples and patterns assigned to a pad from being copied, overwritten by editing or accidentally deleted. → “Protecting a Sample (PROTECT)”
[LOOP] button	PING-PONG LOOP	Loops the sample by repeatedly playing back forward and then backward. → “Playing Back Samples Repeatedly (LOOP)”
[GATE] button	GATE ALL ON/OFF	Turns the GATE parameter for all samples in the bank on/off.
[ROLL] button	ROLL SET	This shows how to set the roll interval (how fast the roll repeats). → “Setting the Roll Interval”
[START/END] button	CHOP	Splits the sample at the marker positions, and assigns the resulting samples to separate pads. → “Using a Marker to Split and Assign a Sample to a Pad (CHOP)”
[PITCH/SPEED] button	ENVELOPE	Sets how the volume changes when the sample plays back. → “Making Fade-in/Fade-out Settings (ENVELOPE)”
[PATTERN SELECT] button	UNDO	Undoes the data you just inputted (recorded). Enabled only when recording a pattern
Pad [1]	FIXED VELOCITY	Sets the sample’s velocity so that it always plays back at 127 (the maximum). → “Setting a Fixed Sample Volume (FIXED VELOCITY)” “Changing the Pitch or Playback Speed of a Sample (PITCH/SPEED)”
Pad [2]	16 VELOCITY	Changes a sample’s velocity (volume) in steps when it plays back. → “Changing the Sample Volume for Playback (16 VELOCITY)”
Pad [3]	CUE	Adjusts the balance of the audio you monitor via the PHONES jack. → “Monitoring with Headphones (CUE)”
Pad [4]	CHROMATIC	Lets you play back samples (changing their pitches) as a chromatic scale with the pads. → “Playing Back Samples in Scale Pitches (CHROMATIC)”
Pad [5]	EXCHANGE	Exchanges (swaps) the sample or pattern data saved in different pads. → “Exchanging (Swapping) Samples Between Pads”
Pad [6]	INIT PARAM	Initializes the sample parameters for the selected pad. → “Initializing the Sample Parameters (INIT PARAM)”
Pad [7]	PAD LINK	Lets you play back all the pads at the same time that are assigned to a group, by using a single pad. → “Playing Back Multiple Pads at the Same Time (PAD LINK GROUPS)”
Pad [8]	MUTE GROUP	Groups together samples that you don’t want to play together (samples that you don’t want layered). → “Preventing Samples from Playing Back at the Same Time (MUTE GROUP)”
Pad [9]	METRONOME	Turns the metronome on/off. → “Sampling” “Resampling a Sample (RESAMPLE)” “Creating a New Pattern” “Resampling a Pattern (RESAMPLE)”
Pad [10]	COUNT-IN	Adds a count-in before sampling or pattern recording begins. → “Adding a Count-in Before Sampling” “Adding a Count-in Before Recording a Pattern”
Pad [11]	TAP TEMPO	Lets you set the tempo in an intuitive way by tapping the pad in time, as if you were clapping out the beat. → “Setting the Tempo in Time with the Rhythm (Tap Tempo)”
Pad [12]	GAIN	Displays the UTILITY MENU > SYSTEM > GAIN tab. → “GAIN tab”
Pad [13]	UTILITY	Displays the UTILITY MENU screen. → “Configuring the Various Settings (UTILITY)”
Pad [14]	IMPORT/EXPORT	Displays the UTILITY MENU > IMPORT (IMPORT/EXPORT MENU). → “Importing Samples (IMPORT SAMPLE)” “Exporting Samples (EXPORT SAMPLE)” “Importing a Project (IMPORT PROJECT)” “Exporting a Project (EXPORT PROJECT)”
Pad [15]	PAD SETTING	Displays the UTILITY MENU > PAD SET (PAD SETTING). → “Configuring the Pad-related Settings (PAD SETTING)”
Pad [16]	EFX SETTING	Displays the UTILITY MENU > EFX SET (EFX SETTING) screen. → “Configuring the Effect Settings (EFX SET)”
[BUS FX] button	MUTE BUS	Temporarily turns off the audio sent to the bus (the sample playback sound or the sound inputted to the INPUT jack), and outputs only the sound of the effect. → “Temporarily Output Only the Effect Sound (MUTE BUS)”
[HOLD] button	PAUSE	Pauses the sample that’s currently playing back. → “Pausing the Sound of a Sample (PAUSE)”
[EXT SOURCE] button	INPUT SETTING	Displays the input settings screen. → “Configuring the Sampling Settings (RECORD SETTING)”
[SUB PAD] button	PROJECT	Displays the SELECT PROJECT screen. → “Selecting a Project”

Shortcuts that use the [REMAIN] button

While holding down the [REMAIN] button	Function (explanation)
Pads [1]–[16]	Sets which sample playback audio is sent to which bus (meaning which effects are used) for each sample. → “Deciding on Effects to Use for Each Sample”
Bank [A/F]–[E/J] buttons	Sets the bus send destination for all samples in a bank.
[MFX] button	Makes the effect edit screen keep displaying. → “Editing the Effects”
[BUS FX] button	You can swap the effects of BUS 1 and BUS 2.

Shortcuts that use the [VALUE] knob

While holding down the [VALUE] knob

Function (explanation)

Effect buttons ([FILTER+DRIVE]–[MFX] button)

Applies effects only while you hold down the effect buttons (EFFECT GRAB).

→ “Turning Effects On/Off at the Desired Timing”

Pads [1]–[16]

Selects a sample (no sound is produced).

Shortcuts that use the [DEL] button

While holding down the [DEL] button

Function (explanation)

[EXIT] button

Deletes all samples or patterns in a bank.

→ “Deleting the Sample from a Pad” “Deleting the Pattern from a Pad”

Shortcuts that use the [COPY] button

While holding down the [COPY] button

Function (explanation)

[EXIT] button

Copies all samples or patterns in a bank to a different bank.

→ “Copying the Sample from a Pad” “Copying the Pattern of a Pad”

Shortcuts that use the [MFX] button

While holding down the [MFX] button

Function (explanation)

[DJFX LOOPER] button

Displays the MFX LIST from #17 onwards.

→ “Using the MFX Effects”