You can use the backup data that you created on your computer to restore the settings of the JX-08.

  1. Connect your computer to the JX-08 with a USB cable.

  2. While holding down the [MENU] button, turn on the power.

    The JX-08 operates in USB mass storage mode. The JX-08 is recognized by your computer as an external storage device. It takes around 20 seconds for the connection to be recognized.

     


  3. Open the “JX-08” on your computer.

    The “BACKUP” folder is shown in the JX-08.


  4. Delete the “BACKUP” folder.
  5. Copy (drag and drop) the backup file that you backed up on your computer to the “RESTORE” folder on the JX-08.

  6. Disconnect the JX-08 from your computer.

    • If you’re using Windows, click the Safely Remove Hardware icon in the taskbar () and then click “Eject Boutique.”
    • If you’re using macOS, drag the JX-08 icon to the trash.


  7. Press the [PAGE/TIE] button on the JX-08.

    The restore operation begins, and the [PAGE/TIE] button blinks. “donE” is displayed once the restore operation is finished.


  8. Turn off the JX-08.