| Step buttons | Parameter | Value | Explanation |
|---|---|---|---|
| [1] | tyPe | R.dLy | This is a reverse delay that adds a reversed and delayed sound to the input sound. A tap delay is connected immediately after the reverse delay. |
| [2] | Sľ | Off, On | Turns the effects on/off. |
| [3] | Sync | Off, On | When this is ON, the effect synchronizes with the tempo of the rhythm. |
| [4] | TiNE | 1–2600 (ms) | Adjusts the delay time from the direct sound until the delay sound is heard. |
| [5] | notE | ||
| [6] | Fb | -98–98 (%) | Adjusts the proportion of the delay sound that is fed back into the effect. (Negative values invert the phase.) |
| [7] | bAL | Volume balance between the effect sound and dry (original) sound |
|
0 |
Effect sound : Dry sound = 0 : 100 |
||
| 100 | Effect sound : Dry sound = 100 : 0 | ||
| [8] | EQ.Lo | -15–15 (dB) | Amount of low range boost/cut |
| [9] | EQ.Hi | -15–15 (dB) | Amount of high range boost/cut |
| [10] | LEU | 0–127 | Output level |
|
You can also press a step button to select the parameter items. |
