Step buttons | Parameter | Value | Explanation |
---|---|---|---|
[1] | tyPe | L.CNP | Degrades the tonal character. |
[2] | Sľ | Off, On | Turns the effects on/off. |
[3] | CONP | 1–6 | Selects the type of filter applied to the sound before it passes through the Lo-Fi effect. 1: Compressor off 2–6: Compressor on |
[4] | LoFi | 1–9 | Degrades the tonal character. The tonal character degrades as this value is increased. |
[5] | FiLt | Selects the type of filter applied to the sound after it passes through the Lo-Fi effect. | |
OFF | Filter is not used | ||
LPF | Cuts the high frequencies | ||
HPF | Cuts the low frequencies | ||
[6] | C.Off | 1–16 | The center frequency of the post filter. Larger values increase the cutoff frequency. |
[7] | EQ.Lo | -15–15 (dB) | Amount of low range boost/cut |
[8] | EQ.Hi | -15–15 (dB) | Amount of high range boost/cut |
[9] | bAL | Volume balance between the effect sound and dry (original) sound |
|
0 | Effect sound : Dry sound = 0 : 100 |
||
100 | Effect sound : Dry sound = 100 : 0 | ||
[10] | LEU | 0–127 | Output level |
You can also press a step button to select the parameter items. |