Your sequencer performance is saved in a memory called a “pattern.” You can recall all kinds of performance patterns by selecting (switching between) the patterns.
The patterns are organized by group (A, B), bank (1–8) and number (1–8), letting you save a total of 2 x 8 x 8 = 128 patterns.
Hold down the [START] button and press the BANK [1 (5)]–[4 (8)] buttons.
This selects the bank.
You can select the group (A/B) by holding down the [START] button and repeatedly pressing the BANK [1 (5)]–[4 (8)] buttons.
Hold down the [START] button and press the NUMBER [1]–[8] buttons.
This selects the pattern.
- You can also turn the [VALUE] knob while holding down the [SHIFT] button to select the bank and pattern.
- When you press the [MENU] button while holding down the [START] button, the [START] button remains in a pressed-down state. In this case, you can still select banks and patterns even if you take your finger off the [START] button. To restore the button to normal, press the [MENU] button.