The delay sound is heard both at the left and at the right.

 

Step buttons Parameter Value Explanation
[1] tyPe dLy2

The delay sound is heard both at the left and at the right.
[2] Sľ Off, On Turns the effects on/off.
[3] Sync Off, On

When this is ON, the effect synchronizes with the tempo of the rhythm.

“Tempo Settings”
[4] TiNE 1–2600 (ms)

Adjusts the delay time from the direct sound until the delay sound is heard.
[5] notE

“About note values”
[6] Fb -98–98 (%) Adjusts the proportion of the delay sound that is fed back into the effect. (Negative values invert the phase.)
[7] H.dNP 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 (Hz), byPS

Center frequency at which the high frequencies of the delay sound fed back to the input are cut

(byPS: does not cut the frequencies)
[8] PAn1 L 64–r 63 Delay 1 pan
[9] PAn2 L 64–r 63 Delay 2 pan
[10] LUL1 0–127 Delay 1 volume
[11] LUL2 0–127 Delay 2 volume
[12] EQ.Lo -15–15 (dB) Amount of low range boost/cut
[13] EQ.Hi -15–15 (dB) Amount of high range boost/cut
[14] bAL

Volume balance between the effect sound and dry (original) sound

0

Effect sound : Dry sound = 0 : 100
100 Effect sound : Dry sound = 100 : 0
[15] LEU 0–127 Output level


You can also press a step button to select the parameter items.