Using the MFX Effects

You can select and use the effects you like for the MFX effects.

1. While holding down the [MFX] button, turn the [VALUE] knob or the [CTRL 3] knob to select the effect to use.

   

   You can also use pads [1]–[16] instead of the [VALUE] knob or the [CTRL 3] knob to select an effect. To use pads [1]–[16] to select effects from #17 and up, hold down the [MFX] button and the [DJFX LOOPER] button at the same time.

2. After selecting the effect, take your finger off the [MFX] button.

   The effect turns on, and the effect edit screen appears.

   

3. Play back a sample.

4. Use the [CTRL 1]–[CTRL 3] knobs to adjust the parameters.

   You can also access the effect sub-parameters by holding down the [VALUE] knob and operating the knobs.