Adding a Count-in Before Sampling

This feature adds a count-in before sampling begins. This gives you time to get ready to play before sampling actually begins.

1. Hold down the [SHIFT] button and press the pad [10].

   The value changes in order each time you press pad [10] while holding down the [SHIFT] button.

   Edit the count-in setting.

   

   Value	Explanation
   COUNTIN 1MEAS	Adds a one-measure count-in before sampling.
   COUNTIN 2MEAS	Adds a two-measure count-in before sampling.
   COUNTIN WAIT	When the input audio signal exceeds the level set in the Auto Trig Level parameter, sampling begins.
   COUNTIN OFF	No count-in is used. Sampling starts immediately after you press the pads [1]–[16] to sample and then press the [REC] button.