Here you can make USB-related settings for when the GX-100 is connected to a computer via USB.
| Parameter | Value | Explanation |
|---|---|---|
| EFX OUT LEVEL | 0–200% |
Adjusts the level of audio output to the computer after passing through the effects of the GX-100. |
| MIX LEVEL | 0–200% |
Adjusts the level of the input sound from the computer. With this setting, the input sound from the computer is mixed into the final stage of the GX-100 signal chain. |
| DRY OUT | 0–200% |
The guitar sound that is input to the GX-100, is output without change (DRY sound); it is not processed by effects. |
| DRY TO EFX | 0–200% |
Adjusts the input level from the computer to the GX-100’s effects. |
| DIRECT MONITOR |
Selects whether the sound of the GX-100, is output to the PHONES jack or the OUTPUT jacks.
|
|
| OFF | Turn this off if the audio data is being passed through within the computer. In this case, you won’t hear the sound unless the computer is set to through. |
|
| ON |
The sound of the GX-100, is output directly. Turn this on if you’re using the GX-100, by itself without connecting to a computer. (If this is off, only the sound that is input to USB will be output.) |
|
| LOOPBACK | OFF, ON |
Turn this ON to send the sound mixed from the computer with the GX-100’s effect sound to your computer. |