Chain Palette

This effect changes the pitch of the original sound (up or down) within a range of two octaves.

Parameter Value Explanation
ON/OFF OFF, ON Turns this effect on/off.
VOICE Selects the number of voices for the pitch shift sound.

1 VOICE

 One-voice pitch-shifted sound output in mono.

2 MONO

 Two-voice pitch-shifted sound (PS1, PS2) output in mono.

2 STEREO

 Two-voice pitch-shifted sound (PS1, PS2) output through left and right channels.

1: PITCH

2: PITCH

 -24–+24 Adjusts the amount of pitch shift (the amount of interval) in semitone steps.

1: FINE

2: FINE

 -50–+50 Make fine adjustments to the interval. The amount of the change in the Fine 100 is equivalent to that of the Pitch 1.

1: MODE

2: MODE

 FAST, MEDIUM, SLOW, MONO The response is slower in the order of FAST, MEDIUM and SLOW, but the modulation is lessened in the same order.

1: PRE-DELAY

2: PRE-DELAY

 0–300 ms, BPM ŀ–Ō

Adjusts the time from when the direct sound is heard until the pitch shifted sounds are heard. Normally you can leave this set at 0 ms.

  • When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
  • If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.
1: FEEDBACK 0–100 Adjusts the feedback amount of the pitch shift sound.

1: LEVEL

2: LEVEL

 0–100 Adjusts the volume of the pitch shifter.
DIRECT LEVEL 0–100 Adjusts the volume of the direct sound.
BPM 40–250

Adjusts the BPM value for each memory.

  • BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
  • When you have an external MIDI device connected, the MASTER BPM synchronizes to the external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting of the MASTER BPM, set “SYNC CLOCK” to “INTERNAL”.