Chain Palette

This is a delay with a maximum delay time of 2,000 ms. This effect is a useful way of adding depth to the sound.

Parameter Value Explanation
ON/OFF OFF, ON Turns this effect on/off.
TIME 1 ms–2000 ms, BPM ŀ–Ō

Adjusts the delay time.

  • When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
  • If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.
FEEDBACK 0–100 Adjusts the volume of delay that is returned to the input. Higher settings will result in more delay repeats.
EFFECT LEVEL 0–120 Adjusts the volume of the delay sound.
DIRECT LEVEL 0–100 Adjusts the volume of the direct sound.
HIGH CUT 20.0 Hz–12.5 kHz, FLAT Sets the frequency at which the high cut filter begins to take effect. When FLAT is selected, the high cut filter has no effect.
CARRYOVER OFF, ON

Sets whether to make the sound of the effect carry over or not after you turn it off.

  • If you want the effect sound to carry over even after you switch to a different memory, set CARRYOVER in MASTER to “ON”.
BPM 40–250

Adjusts the BPM value for each memory.

  • BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
  • When you have an external MIDI device connected, the MASTER BPM synchronizes to the external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting of the MASTER BPM, set “SYNC CLOCK” to “INTERNAL”.