Chain Palette

A vibrato that you can set in greater detail than the standard vibrato effect.

Parameter Value Explanation
ON/OFF OFF, ON Turns this effect on/off.
RATE 0–100, BPM ŀ–Ō

Adjusts the rate of the vibrato.

  • When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
  • If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.
DEPTH 0–100 Adjusts the depth of the vibrato.
COLOR 0–100 Higher settings produce a more complex modulation.
EFFECT LEVEL 0–100 Adjusts the volume.
TRIGGER OFF, ON This selects on/off of the vibrato.
RISE TIME 0–100 This sets the time passing from the moment the Trigger is turned on until the set vibrato is obtained.
DIRECT MIX 0–100 Adjusts the volume of the direct sound.
BPM 40–250

Adjusts the BPM value for each memory.

  • BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
  • When you have an external MIDI device connected, the MASTER BPM synchronizes to the external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting of the MASTER BPM, set “SYNC CLOCK” to “INTERNAL”.