Chain Palette

Models the MXR Phase 90 which was manufactured during the ‘70s.

Parameter Value Explanation
ON/OFF OFF, ON Turns this effect on/off.
RATE 0–100, BPM ŀ–Ō

Adjusts the frequency (speed) of the volume change.

  • When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
  • If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.
DEPTH 0–100 Determines the depth of the phaser effect.
EFFECT LEVEL 0–100 Adjusts the volume of the phaser.
DIRECT MIX 0–100 Adjusts the volume of the direct sound.
BPM 40–250

Adjusts the BPM value for each memory.

  • BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
  • When you have an external MIDI device connected, the MASTER BPM synchronizes to the external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting of the MASTER BPM, set “SYNC CLOCK” to “INTERNAL”.
  • Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.