Chain Palette

This produces an effect like the sound of a rotary speaker.

Parameter Value Explanation
ON/OFF OFF, ON Turns this effect on/off.
SPEED SELECT SLOW, FAST This parameter changes the simulated speaker’s rotating speed (SLOW or FAST).
SLOW RATE 0–100, BPM ŀ–Ō

This parameter adjusts the SPEED SELECT of rotation when set to “SLOW”.

  • When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
  • If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.
FAST RATE 0–100, BPM ŀ–Ō

This parameter adjusts the SPEED SELECT of rotation when set to “FAST”.

  • When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
  • If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.
EFFECT LEVEL 0–100 Adjusts the volume.
RISE TIME 0–100 This parameter adjusts the time it takes for the rotation SPEED SELECT to change when switched from “SLOW” to “FAST”.
FALL TIME 0–100 This parameter adjusts the time it takes for the rotation SPEED SELECT to change when switched from “FAST” to “SLOW”.
MIC DISTANCE 0–100 Adjusts the distance between the horn/rotor and the mic.
ROTOR/HORN 100:0–0:100 Adjusts the volume balance between the horn and rotor.
DRIVE 0–100 Adjusts the amount of distortion in the preamp.
DIRECT MIX 0–100 Adjusts the volume of the direct sound.
BPM 40–250

Adjusts the BPM value for each memory.

  • BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
  • When you have an external MIDI device connected, the MASTER BPM synchronizes to the external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting of the MASTER BPM, set “SYNC CLOCK” to “INTERNAL”.